Get the latest Cisco CCNA Wireless 200-355 dumps and 200-355 pdf, pass exam certification

exam success

Work hard! It’s not hard to get certified! Share the latest Cisco CCNA Wireless 200-355 exam dump for free. online 200-355 exam practice tests. the latest 200-355 exam questions and answers, and guarantee your skills and exam experience! “Implementing Cisco Wireless Networking Fundamentals (WIFUND)” – 200-355 exam! Pass4itsure expert recommendation! Top pass rate!

Get the latest Cisco CCNA Wireless 200-355 pdf

[PDF] Free Cisco 200-355 pdf dumps download from Google Drive: https://drive.google.com/open?id=1IsZuC1kjioOB0XQGkJEkB5pVUIHUtj14

[PDF] Free Full Cisco pdf dumps download from Google Drive: https://drive.google.com/open?id=1xM4qOTLaMDVyi16Ta0wO8qvdS21TfgOU

Valid information provided by Cisco officials

200-355 WIFUND – Cisco: https://www.cisco.com/c/en/us/training-events/training-certifications/exams/current-list/wifund.html

The latest Cisco CCNA Wireless 200-355 exam practice questions test your strength

QUESTION 1
The Cisco WLC administrator needs the guest client traffic to be sent via a tunnel to a specified controller in the DMZ,
no matter which AP the guest user is connected to. What must be configured for a WLAN to achieve this requirement?
A. asymmetric tunneling
B. static mobility anchor
C. symmetric tunneling
D. FlexConnect
Correct Answer: B

QUESTION 2
Which two Cisco Unified Wireless Network capabilities use information that is provided by Radio Resource Management
neighbor messages in version 7.0 MR1? (Choose two.)
A. aggressive load balancing
B. dynamic channel assignment
C. hybrid remote edge access point
D. inter-controller mobility (that is, mobility groups)
E. rogue AP classification
Correct Answer: BE
http://www.cisco.com/c/en/us/support/docs/wireless-mobility/wireless-lan-wlan/71113-rrm-new.html

QUESTION 3
What two capabilities would be present on a wireless client device that supports CCXv3? (Choose two.)
A. WPA2
B. 802.1x
C. PEAP-MSCHAP
D. NAC
E. MFP
F. EAP-TLS
Correct Answer: AB

QUESTION 4
What three components must be the same on a controller and the RADIUS server when adding a RADIUS server to a
WLC? (Choose three.)
A. Username
B. Shared Secret
C. Index Priority
D. Port Number
E. IP Address
F. Network Mask
Correct Answer: BDE

QUESTION 5
Which statement about an infrastructure basic service set is true according to IEEE 802.11 specifications?
A. The set also is called an ad hoc network.
B. The BSSID is generated from the first wireless client that starts up in the IBSS.
C. The set enables the use of ESS.
D. No signals are relayed from one client to another client.
Correct Answer: C
The set-up formed by the access point and the stations located within its coverage area are called the basic service set
(or infrastructure basic service set, or BSS for short). Each BSS forms one cell.
We can link several BSS\\’s together (it means we link access points) using a connection called a distribution system in
order to form an extended service set or ESS. The distribution system can also be a wired network, a cable between
two
access points or even a wireless network.
Note: When a station moves from one access point to another in an ESS, it is called roaming.

QUESTION 6
What is use of survey tool?
A. find the RF noise and interference.
B. capture date and analysis it offline
Correct Answer: A

QUESTION 7
Which third-party tool is appropriate to assist in troubleshooting?
A. Wireshark
B. DART
C. VLAN
D. dot1q trunk
Correct Answer: A

QUESTION 8
When a wireless client is authenticated in a controller-based wireless network, which three pieces of source
identification information can be used by the controller for an Access-Request message that is sent to an external
RADIUS server? (Choose three.)
A. wireless client IP address
B. controller IP address
C. AP IP address
D. wireless client MAC address
E. controller MAC address
F. AP MAC address
Correct Answer: BEF
From the Call Station ID Type drop-down list, choose IP Address, System MAC Address, or AP MAC Address to specify
whether the IP address, system MAC address, or AP MAC address of the originator will be sent to the RADIUS server in
the Access-Request message.
http://www.cisco.com/c/en/us/td/docs/wireless/controller/7-0/configuration/guide/c70/c70sol.html#wp1389032 (Step 3)

QUESTION 9
Refer to the exhibit.

pass4itsure 200-355 exam question q9

Which three switch port types are valid for these connections? (Choose three.)
A. routed port
B. port-channel access
C. access
D. trunk
E. port-channel trunk
F. port-channel
Correct Answer: CDE

QUESTION 10
Instructions:
THIS TASK DOES NOT REQUIRE DEVICE CONFIGURATION
To access the multiple-choice questions, click on the numbered box on the left of the top panel.
There is one multiple-choice question with this task. Be sure to answer the question before selecting the Next button
Scenario:
You have just finished configuring a WLC2504 through the console CLI. The WLC is attached to an existing production
network switch. However, you are not able to reach the WLC via https://10.10.10.10.pass4itsure 200-355 exam question q10 pass4itsure 200-355 exam question q10-1 pass4itsure 200-355 exam question q10-2 pass4itsure 200-355 exam question q10-3 pass4itsure 200-355 exam question q10-4 pass4itsure 200-355 exam question q10-5

Which change can correct inband access to the WLC?
A. change the switch FastEthernetO/1 duplex setting
B. change the switch FastEthernetO/1 speed setting
C. enable the switch FastEthernetO/1 spanning-tree port-fast trunk
D. change the switch FastEthernetO/1 trunk encapsulation
E. change the WLC management interface to use DHCP
F. change the WLC management interface VLAN
G. change the WLC configuration of NTP
H. browse to WLC via http://10.10.10.10
Correct Answer: D
All of the other ports in the network are using the default VLAN (VLAN 1) but port 0/1, which connects to the WLC, is
configured as a trunk, so VLAN 1 is not operational.

pass4itsure 200-355 exam question q10-6

QUESTION 11
Refer to the exhibit.pass4itsure 200-355 exam question q11

Which GUI item do you click to configure maps with APs in Cisco WCS?
A. Configure
B. Client
C. CleanAir
D. Services
E. Administration
F. Monitor
Correct Answer: F
The Monitor menu provides you with a top level description of the devices on your network. You can monitor your
network, maps, various devices, security, alarms, events, or reports.
http://www.cisco.com/c/en/us/td/docs/wireless/wcs/5-2/configuration/guide/WCS5_2cg/5_2wst.html#wp1060563

QUESTION 12
Which three parameters must be configured for local EAP-FAST on the controller? (Choose three.)
A. PAC
B. client key
C. NTP source
D. TTL for PAC
E. server key
F. authority ID and information
Correct Answer: DEF

QUESTION 13
What does RF determine?
A. cycle pattern size
B. how often a wave occurs
C. signal size
D. quantity of energy injected in a signal
Correct Answer: B
RF communication works by creating electromagnetic waves at a source and being able to pick up those
electromagnetic waves at a particular destination. These electromagnetic waves travel through the air at near the speed
of light. The wavelength of an electromagnetic signal is inversely proportional to the frequency; the higher the frequency,
the shorter the wavelength. http://www.digi.com/technology/rf-articles/rf-basic

Share Pass4itsure coupons for free

pass4itsure coupon

Reasons to choose Pass4itsure

Pass4itsure offers the latest exam practice questions and answers free of charge! Update all exam questions throughout the year,
with a number of professional exam experts! To make sure it works! Maximum pass rate, best value for money!
Helps you pass the exam easily on your first attempt.

about pass4itsure

This maybe you’re interested

Summarize:

Collecting the latest and most effective Cisco CCNA Wireless 200-355 exam practice questions to help you improve exam success, 200-355 pdf and 200-355 video learning make it easier to gain knowledge! Full 200-355 exam dump: Experts recommend real leader Pass4itsure. Click here to easily pass the 200-355